Superior adhesion to all types of SMC and fiberglass. SMC resin is a polyester-based resin used for repair of SMC and fiberglass panels and parts. More effective on SMC than conventional fiberglass-type resins. Formulated to use with fiberglass mat, cloth and tape. Waterproof and impact resistant. Working time of 20-30 minutes. Cures to a sandable surface much faster than regular fiberglasss resin. White cream hardener included. NOTE: Correct catalyzation and thorough mixing are necessary. Read directions on can thoroughly.
Search Results
100864 – SMC Resin, Quart
Superior adhesion to all types of SMC and fiberglass. SMC resin is a polyester-based resin used for repair of SMC and fiberglass panels and parts. More effective on SMC than conventional fiberglass-type resins. Formulated to use with fiberglass mat, cloth and tape. Waterproof and impact resistant. Working time of 20-30 minutes. Cures to a sandable surface much faster than regular fiberglasss resin. White cream hardener included. NOTE: Correct catalyzation and thorough mixing are necessary. Read directions on can thoroughly.
Technical Resources
Tech TipsWe are pleased to announce we are extending the shelf life of our products that utilize BPO as a catalyst. After rigorous testing and continuous improvements, this is a major enhancement to our products that reflects our commitment to innovation and quality....
Videos
VideosEvercoat Commercial Products Overview BodyShop Business Editor Jason Stahl and Tim McKinney, senior application engineer from Evercoat, discuss the research and development behind some of Evercoat’s commercial products for fire engines, trains, and other...
FAQS
FAQSBody FillerA. Yes, fillers can be heated to accelerate the cure or to adjust the cure during colder weather. The general recommendation is to not exceed 120°F (50°C) for any longer than 15 minutes.A. Evercoat fillers may be tinted with Evercoat® Coloring Agents....
FAQS
FAQSBody FillerA. Yes, fillers can be heated to accelerate the cure or to adjust the cure during colder weather. The general recommendation is to not exceed 120°F (50°C) for any longer than 15 minutes.A. Evercoat fillers may be tinted with Evercoat® Coloring Agents....
Videos
VideosHow to Apply | Commercial Optex® FillerHow to Apply | 440 ExpressHow to Apply | Metal Glaze PuttyHow to Apply | Lite Weight® FillerHow to Apply | Commercial Ultra™How to Apply | Poly-Flex PuttyHow to Apply | Optex® Super Build 4:1 Polyester Primer SurfacerHow to...
